Speed preselection
To activate the user interface (6), press the mode (12) button.
With the mode button (12), you can preselect the required speed in three stages. Press the mode button (12) as often as needed until the required setting is indicated in the speed indicator (10). The selected setting will be saved.
The required speed depends on the material and the working conditions; it can be ascertained through practical tests.
The information in the table below describes the recommended values.
Basic speed setting at level | |||
|---|---|---|---|
1 | 2 | 3 | |
[min–1] | [min–1] | [min–1] | |
Number of speed settings | |||
3 | 1200 | 1700 | 2300 |
You can use the mode button (12) to preselect the required speed, but only when the power tool is not in operation.